Product Description
Proxicast Tri-Band 2x2 MIMO WiFi Omni Antenna Model # ANT-131-M22
Key Features
Low Profile
Inconspicuous - 3.2 inches TallSimple Geometric ShapeOmnidirectional CoveragePaintable to Blend into Surroundings
Vandal Resistant
Thick Threaded Mounting PostNot Removable from OutsideNo Exposed Coax Cabling
Waterproof
Water & Dust Proof IP67 Rated When InstalledAdhesive Rubber Gasket between Antenna and Mounting Surface
For outdoor/indoor applications. Excellent for Wi-Fi hotspots, kiosks, M2M, IoT, telemetry and vehicle applications. Connect this antenna to existing Wi-Fi routers, access points or other Wi-Fi enabled devices which have 2 reverse polarity SMA external antenna connectors.
This low profile (~ 3 inches tall) fixed mount omni-directional 2x2 MIMO antenna provides 3 to 5 dBi of gain and supports the 802.11 b/g/n 2.4 GHz, 802.11 a/ac/ax 5.8 GHz and 802.11 be 6 GHz (Wi-Fi 7) frequency bands.
Permanently mounts via a 1/2 in. (13 mm) hole with locking internal nut. Resists vandalism with no exposed coax cable, high impact ABS radome shell and an extra thick threaded screw mounting post. Includes 10 ft of low-loss RG174 paired coax fed through center mounting post. Includes "L" bracket for optional wall mounting.
Ideal for use in vending machines, meter housings, equipment sheds, or other locations requiring a low-profile vandal resistant external antenna. Also suitable for vehicle mounting on buses, vans, trucks or other mobile installations. Completely waterproof (IP67) when installed with post extending into a water-tight enclosure. Not waterproof when used exclusively with wall bracket.
Integrated RPSMA male plug connectors mate with female jacks found on most Wi-Fi access points and routers.
* For optimum performance this antenna should be mounted on a flat, horizontal metal surface at least 8 inches in diameter.
Works with Any WiFi System
Use with Any WiFi Device that has 2 External Antennas Simple Installation Drill 1/2" Hole in Mounting Surface Feed Coax Through Hole Tighten Antenna Lock Nut Unscrew Factory Antennas from Device Screw on Proxicast Antenna Cables
Tri-Band 2.4 , 5.8 & 6 GHz Support Supports all WiFi Technologies and Generations
WiFi-1 ~ 802.11aWiFi-2 ~ 802.11bWiFi-3 ~ 802.11gWiFi-4 ~ 802.11niWiFi-5 ~ 802.11acWiFi-6 ~ 802.11axWiFi-7 ~ 802.11be Universal Compatibility
Industry Standard RP-SMA ConnectorWorks with Any Brand of WiFi Access Point, Router, Booster, Repeater, Bridge, Camera, etc.Use with Mesh Wireless RadiosUse as a Bluetooth or ZigBee Antenna
Frequency Range 2.4, 5.8 & 6 GHz WiFi Frequency Bands Peak Gain 5 dBi Impedance 50 Ohm VSWR < 2:1 Polarization Vertical Connectors 2x Reverse Polarity SMA Male Plugs (RP-SMA) Coax Length 10 ft (3 m) Low-Loss RG174 Paired Coax Mounting Screw Mounted via a 1/2 in. (13 mm) Hole with Locking Internal Nut Ground Plane 8" diameter min recommended Dimensions Height 3.2 in. (82mm); Diameter 1.9 in. (48 mm) Weight 4.2 oz (119 g) Materials ABS Plastic (black) + Nickel-Plated Brass + Foam Adhesive Pad Operating Temperature -40°C to +70°C Full Specification Sheet Download PDF under the Product Guides and Documents section of this listing Support Free US-based Support Model Number ANT-131-M22
Application Examples
Vending Machines
Inventory LevelsMachine StatusAdvertising UpdatesPrice Changes
Kiosks & ATMs
Bank MachinesSelf Service KiosksDigital SignageAlarm Systems
Machine Control Panels
PLC'sNEMA EnclosuresWeather StationsMeters & Pump Houses
Surveillance
WiFi CamerasDVRs' & NVR'sCovert InstallationsLaw Enforcement
Add to Cart
Add to Cart
Customer Reviews
3.5 out of 5 stars
40
3.5 out of 5 stars
40
4.6 out of 5 stars
12
3.7 out of 5 stars
25
Price
$27.95$27.95 $39.95$39.95
—
—
WiFi Bands
2.4, 5.8 & 6 GHz 2.4, 5.8 & 6 GHz 2.4, 5.8 & 6 GHz 2.4, 5.8 & 6 GHz
Peak Gain
5 dBi 5 dBi 2-4 dBi 2 dBi
Height
3.2 in 3.2 in 0.65 in 0.6 in
Diameter
1.9 in 1.9 in 3.2 in 1.8 in
Connector
RP-SMA Male 2 x RP-SMA Male 2 x RP-SMA Male RP-SMA Male
Coax Length
10 ft 10 ft 3 ft 6.5 ft
Feature
Vandal Resistant 2x2 MIMO 2x2 MIMO Small Diameter
MIMO Omni Directional Indoor / Outdoor WiFi Antenna - 3 inches Tall with 3-5 dBi Gain - Permanent Mount - Weatherproof
Works on all WiFi Networks Worldwide including 2400 MHz, 5800 MHz and 6000 MHz. Supports all WiFi Versions including WiFi-6 and WiFi-7
2 Reverse Polarity SMA Male Connectors on 10 ft Low-Loss Coax Lead - Rugged Vandal Proof Materials & Design
Compatible WiFi Outdoor Antenna for WLAN Devices such as Access Points, Hotspots and Routers from Airlink, ASUS, CalAmp, Cisco, Cradlepoint, Digi, D-Link, Linksys, MoFi, Netgear, Novatel, Pepwave, TP-Link, Sierra Wireless and many others
Ideal for industrial, commercial and IOT applications such as Retail Hot Spots, Kiosks, Vending, Point-of-Sale (POS), Machine-to-Machine (M2M), Video Surveillance (Cameras, DVRs, NVRs), NEMA Control Panels & Enclosures, Mobile & Vehicles (buses, trucks, cars, vans, motorhomes), SCADA, Telemetry, PLCs, RTUs, Digital Signage and more
