Airline CEOs to meet with Boeing over Alaska 737-9 aftermath

Date:


As the aviation industry struggles to cope with repercussions of the Alaska Airlines 737 MAX 9 door plug blowout of January 5, 2024, heads of several airlines have requested a meeting with members of the Boeing board.

According to the Wall Street Journal, which spoke with people familiar with the matter, the airline CEOs are frustrated with production problems at Boeing resulting from the planemaker having to address safety issues at its facilities in the wake of the Alaska incident.

Boeing is under pressure to deliver a comprehensive action plan for improving safety going forward to the Federal Aviation Administration (FAA), following a six-week audit of its factory during which multiple failures were discovered.

In response to calls from the airline chiefs to discuss getting the situation back on track, Boeing has agreed to send board members to meet with them next week.

The CEO of Boeing, David Calhoun, will not be in attendance, but Boeing told the Wall Street Journal that he fully supports the move.

“We’ve been actively focused on listening to our customers at all levels of our company,” a Boeing official told the Wall Street Journal.

Alaska Airlines, Southwest Airlines, American Airlines and United Airlines are all waiting on deliveries of jets that are now facing delays.

Boeing delivered around 40 737 MAXs a month at the end of 2023, but this figure is expected to fall to nearer 15 in the near future.

FBI reach out to Alaska 737-9 ‘victims’

In other developments, the Seattle Times has reported that the FBI has contacted passengers who were on board the Alaska Airlines aircraft involved in January’s incident.

The FBI, which is carrying out the recently announced Department of Justice criminal investigation of Boeing, has advised passengers by letter that they may be a “possible victim of a crime”.

The Seattle Times was shown a copy of the FBI letter dated March 19, 2024.

“As a Victim Specialist with the Seattle Division, I’m contacting you because we have identified you as a possible victim of a crime. This case is currently under investigation by the FBI. A criminal investigation can be a lengthy undertaking, and for several reasons, we cannot tell you about its progress at this time,” the letter reads.

The letter also gives passengers a link to register for updates on the case and an email address to contact the FBI.

Alaska Airlines flight 1282 suffered a rapid decompression when a left mid-cabin door plug separated from the aircraft at 16,000 feet on January 5, 2024.



Source link

LEAVE A REPLY

Please enter your comment!
Please enter your name here

Share post:

Advertise With Us

For a sponsored / Paid / Guest Post. advertisers that target the software, games, telecom and IT industry. contact us at dagoldinfo@gmail.com

Popular

More like this
Related

Proxicast Indoor/Outdoor 2×2 MIMO Omnidirectional WiFi Antenna – Tri-Band 2.4/5.8/6 GHz – 3-5 dBi Gain – Vandal Resistant Low Profile Fixed Through-Hole Mount –...

Product Description FactoryFactory

Proxicast Tri-Band 2x2 MIMO WiFi Omni Antenna Model # ANT-131-M22

Key Features

Smaller than a can of soupSmaller than a can of soup

Through hole mountingThrough hole mounting

WaterproofWaterproof

Low Profile

Inconspicuous - 3.2 inches TallSimple Geometric ShapeOmnidirectional CoveragePaintable to Blend into Surroundings Vandal Resistant

Thick Threaded Mounting PostNot Removable from OutsideNo Exposed Coax Cabling Waterproof

Water & Dust Proof IP67 Rated When InstalledAdhesive Rubber Gasket between Antenna and Mounting Surface

For outdoor/indoor applications. Excellent for Wi-Fi hotspots, kiosks, M2M, IoT, telemetry and vehicle applications. Connect this antenna to existing Wi-Fi routers, access points or other Wi-Fi enabled devices which have 2 reverse polarity SMA external antenna connectors.

This low profile (~ 3 inches tall) fixed mount omni-directional 2x2 MIMO antenna provides 3 to 5 dBi of gain and supports the 802.11 b/g/n 2.4 GHz, 802.11 a/ac/ax 5.8 GHz and 802.11 be 6 GHz (Wi-Fi 7) frequency bands.

Permanently mounts via a 1/2 in. (13 mm) hole with locking internal nut. Resists vandalism with no exposed coax cable, high impact ABS radome shell and an extra thick threaded screw mounting post. Includes 10 ft of low-loss RG174 paired coax fed through center mounting post. Includes "L" bracket for optional wall mounting.

Ideal for use in vending machines, meter housings, equipment sheds, or other locations requiring a low-profile vandal resistant external antenna. Also suitable for vehicle mounting on buses, vans, trucks or other mobile installations. Completely waterproof (IP67) when installed with post extending into a water-tight enclosure. Not waterproof when used exclusively with wall bracket.

Integrated RPSMA male plug connectors mate with female jacks found on most Wi-Fi access points and routers.

* For optimum performance this antenna should be mounted on a flat, horizontal metal surface at least 8 inches in diameter.

Works with Any WiFi System

WiFi LogoWiFi Logo Use with Any WiFi Device that has 2 External Antennas Simple Installation Drill 1/2" Hole in Mounting Surface Feed Coax Through Hole Tighten Antenna Lock Nut Unscrew Factory Antennas from Device Screw on Proxicast Antenna Cables Tri-Band 2.4 , 5.8 & 6 GHz Support Supports all WiFi Technologies and Generations

WiFi-1 ~ 802.11aWiFi-2 ~ 802.11bWiFi-3 ~ 802.11gWiFi-4 ~ 802.11niWiFi-5 ~ 802.11acWiFi-6 ~ 802.11axWiFi-7 ~ 802.11be Universal Compatibility

Industry Standard RP-SMA ConnectorWorks with Any Brand of WiFi Access Point, Router, Booster, Repeater, Bridge, Camera, etc.Use with Mesh Wireless RadiosUse as a Bluetooth or ZigBee Antenna

Technical Specifications

Frequency Range 2.4, 5.8 & 6 GHz WiFi Frequency Bands Peak Gain 5 dBi Impedance 50 Ohm VSWR < 2:1 Polarization Vertical Connectors 2x Reverse Polarity SMA Male Plugs (RP-SMA) Coax Length 10 ft (3 m) Low-Loss RG174 Paired Coax Mounting Screw Mounted via a 1/2 in. (13 mm) Hole with Locking Internal Nut Ground Plane 8" diameter min recommended Dimensions Height 3.2 in. (82mm); Diameter 1.9 in. (48 mm) Weight 4.2 oz (119 g) Materials ABS Plastic (black) + Nickel-Plated Brass + Foam Adhesive Pad Operating Temperature -40°C to +70°C Full Specification Sheet Download PDF under the Product Guides and Documents section of this listing Support Free US-based Support Model Number ANT-131-M22

Application Examples

Vending MachinesVending Machines

Kiosks & ATMsKiosks & ATMs

Machine Control PanelsMachine Control Panels

Surveillance CameraSurveillance Camera

Vending Machines

Inventory LevelsMachine StatusAdvertising UpdatesPrice Changes Kiosks & ATMs

Bank MachinesSelf Service KiosksDigital SignageAlarm Systems Machine Control Panels

PLC'sNEMA EnclosuresWeather StationsMeters & Pump Houses Surveillance

WiFi CamerasDVRs' & NVR'sCovert InstallationsLaw Enforcement Add to Cart Add to Cart Customer Reviews 3.5 out of 5 stars 40 3.5 out of 5 stars 40 4.6 out of 5 stars 12 3.7 out of 5 stars 25 Price $27.95$27.95 $39.95$39.95 — — WiFi Bands 2.4, 5.8 & 6 GHz 2.4, 5.8 & 6 GHz 2.4, 5.8 & 6 GHz 2.4, 5.8 & 6 GHz Peak Gain 5 dBi 5 dBi 2-4 dBi 2 dBi Height 3.2 in 3.2 in 0.65 in 0.6 in Diameter 1.9 in 1.9 in 3.2 in 1.8 in Connector RP-SMA Male 2 x RP-SMA Male 2 x RP-SMA Male RP-SMA Male Coax Length 10 ft 10 ft 3 ft 6.5 ft Feature Vandal Resistant 2x2 MIMO 2x2 MIMO Small Diameter
MIMO Omni Directional Indoor / Outdoor WiFi Antenna - 3 inches Tall with 3-5 dBi Gain - Permanent Mount - Weatherproof
Works on all WiFi Networks Worldwide including 2400 MHz, 5800 MHz and 6000 MHz. Supports all WiFi Versions including WiFi-6 and WiFi-7
2 Reverse Polarity SMA Male Connectors on 10 ft Low-Loss Coax Lead - Rugged Vandal Proof Materials & Design
Compatible WiFi Outdoor Antenna for WLAN Devices such as Access Points, Hotspots and Routers from Airlink, ASUS, CalAmp, Cisco, Cradlepoint, Digi, D-Link, Linksys, MoFi, Netgear, Novatel, Pepwave, TP-Link, Sierra Wireless and many others
Ideal for industrial, commercial and IOT applications such as Retail Hot Spots, Kiosks, Vending, Point-of-Sale (POS), Machine-to-Machine (M2M), Video Surveillance (Cameras, DVRs, NVRs), NEMA Control Panels & Enclosures, Mobile & Vehicles (buses, trucks, cars, vans, motorhomes), SCADA, Telemetry, PLCs, RTUs, Digital Signage and more