Climate Expert: Why Excluding Climate Change From Florida’s Energy Policy Is Sound Strategy

Date:


An article in Inside Climate News (ICN) reports on a proposed change in Florida’s state code to remove climate change as a consideration for policy issues, now in the hands of Gov. Ron DeSantis. [emphasis, links added]

Based on who ICN interviewed for the story and what they said, the story implies that the bill is putting Floridians at risk by ignoring climate change. This is false.

Because climate change is not exacerbating hazards in Florida but threatening the state’s energy security, the bill before DeSantis will benefit Florida and merit final approval.

The article begins:

Addressing the human-caused emissions warming the global climate and contributing to impacts here like hotter temperatures, rising seas, and more damaging hurricanes could no longer be part of Florida’s energy policy, under legislation before Gov. Ron DeSantis.

The measure, approved earlier this spring by the Republican-controlled legislature, would erase several instances of the words “climate change” from the state code and restructure Florida’s fossil fuel-based energy policy around reducing reliance on foreign sources and strengthening the energy infrastructure against “natural and manmade threats.”

The legislation now before DeSantis would repeal state grant programs encouraging energy efficiency and renewable energy and ban offshore wind facilities within a mile of the coastlines, none of which currently exist. The measure also would require the Public Service Commission to assess the security and resiliency of the electric grid and natural gas facilities against physical and cyber threats. Rep. Rick Roth (R-West Palm Beach), one of the bill’s sponsors, characterized climate change as a “made-up problem.”

Florida’s Legislature is correct in removing this language in the state code because it is misleading and unnecessary.

Many of the so-called “climate threats” discussed in the ICN article are actually short-term weather and not long-term climate events, and the claimed harm that ICN is linking to climate change is refuted by real-world data.

Most notable in the threat list are hurricanes. For example, after Category 5 Hurricane Katrina hit New Orleans in late August 2005, scientists and pundits alike began claiming that sort of devastation was the “new normal” and that hurricane frequency and intensity were only going to get worse.

Climate model projections were cited as “proof” for such claims. Former Vice-President Al Gore exploited the Katrina disaster in a call for climate action.

Yet, after Katrina, the United States entered a hurricane drought. Between October 24, 2005, and August 17, 2017, a 4,323-day (142-month, 12-year) period, the United States entered its longest recorded period of no major hurricane of category three or higher making landfall within the country.

Climate models failed to simulate the hurricane drought. Florida was spared the so-called “climate threat” from hurricanes.

Even today, there is no long-term upward trend in hurricane activity for the Atlantic Ocean or the globe.

[According to ICN], the other supposed “climate threats” facing Florida are sea level rise, coastal flooding, and increased temperature in cities.

Florida’s “sea level rise” is actually more attributable to subsidence rather than to a climate change-induced increase in rates of rise.

This fact is clearly examined in the scientific paper “Land subsidence contribution to coastal flooding hazard in southeast Florida,” published in Proceedings of IAHS in 2020. The paper clearly states:

Preliminary results reveal that subsidence occurs in localized patches (< 0.02 km2) with a magnitude of up to 3 mm yr−1, in urban areas built on reclaimed marshland. These results suggest that the contribution of local land subsidence affect[s] only small areas along the southeast Florida coast, but in those areas, coastal flooding hazard is significantly higher compared to non-subsiding areas.

Subsidence is also driven by freshwater withdrawals from the region’s groundwater reservoirs to satisfy the Miami metro area’s growing population.

As discussed in numerous previous Climate Realism articles here and here, for example, sea level rise in Florida and beyond is not increasing rapidly and has more to do with subsidence and land management than climate change-induced rise.

Coastal flooding isn’t even a recognized climate threat by the U.N. Intergovernmental Panel on Climate Change (IPCC), which says it has found no indication that climate change is causing increased coastal flooding, as is shown in Table 12.12 | on Page 90 – Chapter 12 of the UN IPCC Sixth Assessment Report.

The emergence of Climate Impact Drivers (CIDs) in time periods shows no correlation. The color corresponds to the region’s confidence with the highest confidence: white colors indicate where evidence of a climate change signal is lacking or the signal is not present, leading to overall low confidence of an emerging signal. The section is highlighted in yellow.

Neither sea-level nor coastal flooding has been an observed element of climate change.

Even in 2050 and 2100, the IPCC forecasts no coastal flooding attributable to climate change.

Temperatures in Florida are rising on average, but a cursory examination of where it is happening reveals a clear pattern. An increase in overnight low temperatures is a clear indicator of an increased Urban Heat Island effect (UHI).

Florida’s population has doubled from about 10 million in 1990 to over 20 million now. This more than doubling of the state’s population is reflected clearly in UHI data compiled by Dr. Roy Spencer as seen in the graph below.

Note the huge temperature effects from development in Florida’s fastest-growing cities.

Climate change isn’t selective about the where of temperature increases, but UHI is.

As previously reported in a Climate Realism article: DeSantis is Right, New York Times, We Should all ‘Shrug Off the Threat’ of Catastrophic Climate Change we said:

In short, DeSantis is right to “shrug off” the climate hype and focus instead on the real problems facing Florida. Doing so might reduce the chances of seawater incursion and subsidence, and minimize damage done by hurricanes undoubtedly in store for the state in the future. Ending fossil fuel use in the vain quest to control the climate will do neither.

We commend the Florida legislature for recognizing that real-world data does not support climate alarmism in Florida and believe the law currently before DeSantis puts Florida on the right track to improved energy security and sound regulatory policies concerning real environmental and economic threats facing Florida.

Read more at Climate Realism



Source link

LEAVE A REPLY

Please enter your comment!
Please enter your name here

Share post:

Advertise With Us

For a sponsored / Paid / Guest Post. advertisers that target the software, games, telecom and IT industry. contact us at dagoldinfo@gmail.com

Popular

More like this
Related

Proxicast Indoor/Outdoor 2×2 MIMO Omnidirectional WiFi Antenna – Tri-Band 2.4/5.8/6 GHz – 3-5 dBi Gain – Vandal Resistant Low Profile Fixed Through-Hole Mount –...

Product Description FactoryFactory

Proxicast Tri-Band 2x2 MIMO WiFi Omni Antenna Model # ANT-131-M22

Key Features

Smaller than a can of soupSmaller than a can of soup

Through hole mountingThrough hole mounting

WaterproofWaterproof

Low Profile

Inconspicuous - 3.2 inches TallSimple Geometric ShapeOmnidirectional CoveragePaintable to Blend into Surroundings Vandal Resistant

Thick Threaded Mounting PostNot Removable from OutsideNo Exposed Coax Cabling Waterproof

Water & Dust Proof IP67 Rated When InstalledAdhesive Rubber Gasket between Antenna and Mounting Surface

For outdoor/indoor applications. Excellent for Wi-Fi hotspots, kiosks, M2M, IoT, telemetry and vehicle applications. Connect this antenna to existing Wi-Fi routers, access points or other Wi-Fi enabled devices which have 2 reverse polarity SMA external antenna connectors.

This low profile (~ 3 inches tall) fixed mount omni-directional 2x2 MIMO antenna provides 3 to 5 dBi of gain and supports the 802.11 b/g/n 2.4 GHz, 802.11 a/ac/ax 5.8 GHz and 802.11 be 6 GHz (Wi-Fi 7) frequency bands.

Permanently mounts via a 1/2 in. (13 mm) hole with locking internal nut. Resists vandalism with no exposed coax cable, high impact ABS radome shell and an extra thick threaded screw mounting post. Includes 10 ft of low-loss RG174 paired coax fed through center mounting post. Includes "L" bracket for optional wall mounting.

Ideal for use in vending machines, meter housings, equipment sheds, or other locations requiring a low-profile vandal resistant external antenna. Also suitable for vehicle mounting on buses, vans, trucks or other mobile installations. Completely waterproof (IP67) when installed with post extending into a water-tight enclosure. Not waterproof when used exclusively with wall bracket.

Integrated RPSMA male plug connectors mate with female jacks found on most Wi-Fi access points and routers.

* For optimum performance this antenna should be mounted on a flat, horizontal metal surface at least 8 inches in diameter.

Works with Any WiFi System

WiFi LogoWiFi Logo Use with Any WiFi Device that has 2 External Antennas Simple Installation Drill 1/2" Hole in Mounting Surface Feed Coax Through Hole Tighten Antenna Lock Nut Unscrew Factory Antennas from Device Screw on Proxicast Antenna Cables Tri-Band 2.4 , 5.8 & 6 GHz Support Supports all WiFi Technologies and Generations

WiFi-1 ~ 802.11aWiFi-2 ~ 802.11bWiFi-3 ~ 802.11gWiFi-4 ~ 802.11niWiFi-5 ~ 802.11acWiFi-6 ~ 802.11axWiFi-7 ~ 802.11be Universal Compatibility

Industry Standard RP-SMA ConnectorWorks with Any Brand of WiFi Access Point, Router, Booster, Repeater, Bridge, Camera, etc.Use with Mesh Wireless RadiosUse as a Bluetooth or ZigBee Antenna

Technical Specifications

Frequency Range 2.4, 5.8 & 6 GHz WiFi Frequency Bands Peak Gain 5 dBi Impedance 50 Ohm VSWR < 2:1 Polarization Vertical Connectors 2x Reverse Polarity SMA Male Plugs (RP-SMA) Coax Length 10 ft (3 m) Low-Loss RG174 Paired Coax Mounting Screw Mounted via a 1/2 in. (13 mm) Hole with Locking Internal Nut Ground Plane 8" diameter min recommended Dimensions Height 3.2 in. (82mm); Diameter 1.9 in. (48 mm) Weight 4.2 oz (119 g) Materials ABS Plastic (black) + Nickel-Plated Brass + Foam Adhesive Pad Operating Temperature -40°C to +70°C Full Specification Sheet Download PDF under the Product Guides and Documents section of this listing Support Free US-based Support Model Number ANT-131-M22

Application Examples

Vending MachinesVending Machines

Kiosks & ATMsKiosks & ATMs

Machine Control PanelsMachine Control Panels

Surveillance CameraSurveillance Camera

Vending Machines

Inventory LevelsMachine StatusAdvertising UpdatesPrice Changes Kiosks & ATMs

Bank MachinesSelf Service KiosksDigital SignageAlarm Systems Machine Control Panels

PLC'sNEMA EnclosuresWeather StationsMeters & Pump Houses Surveillance

WiFi CamerasDVRs' & NVR'sCovert InstallationsLaw Enforcement Add to Cart Add to Cart Customer Reviews 3.5 out of 5 stars 40 3.5 out of 5 stars 40 4.6 out of 5 stars 12 3.7 out of 5 stars 25 Price $27.95$27.95 $39.95$39.95 — — WiFi Bands 2.4, 5.8 & 6 GHz 2.4, 5.8 & 6 GHz 2.4, 5.8 & 6 GHz 2.4, 5.8 & 6 GHz Peak Gain 5 dBi 5 dBi 2-4 dBi 2 dBi Height 3.2 in 3.2 in 0.65 in 0.6 in Diameter 1.9 in 1.9 in 3.2 in 1.8 in Connector RP-SMA Male 2 x RP-SMA Male 2 x RP-SMA Male RP-SMA Male Coax Length 10 ft 10 ft 3 ft 6.5 ft Feature Vandal Resistant 2x2 MIMO 2x2 MIMO Small Diameter
MIMO Omni Directional Indoor / Outdoor WiFi Antenna - 3 inches Tall with 3-5 dBi Gain - Permanent Mount - Weatherproof
Works on all WiFi Networks Worldwide including 2400 MHz, 5800 MHz and 6000 MHz. Supports all WiFi Versions including WiFi-6 and WiFi-7
2 Reverse Polarity SMA Male Connectors on 10 ft Low-Loss Coax Lead - Rugged Vandal Proof Materials & Design
Compatible WiFi Outdoor Antenna for WLAN Devices such as Access Points, Hotspots and Routers from Airlink, ASUS, CalAmp, Cisco, Cradlepoint, Digi, D-Link, Linksys, MoFi, Netgear, Novatel, Pepwave, TP-Link, Sierra Wireless and many others
Ideal for industrial, commercial and IOT applications such as Retail Hot Spots, Kiosks, Vending, Point-of-Sale (POS), Machine-to-Machine (M2M), Video Surveillance (Cameras, DVRs, NVRs), NEMA Control Panels & Enclosures, Mobile & Vehicles (buses, trucks, cars, vans, motorhomes), SCADA, Telemetry, PLCs, RTUs, Digital Signage and more