How a sailor shortage is crippling ship maintenance at sea

Date:


The Navy’s manning shortages are curbing the service’s ability to repair its ships while at sea, according to a watchdog report released Monday.

Sixty-three percent of executive officers — a ship’s second-in-command — surveyed reported that insufficient manning made it “moderately to extremely difficult to complete repairs while underway,” according to a Government Accountability Office report released Monday.

At-sea basic maintenance and repairs are critical to ensuring a ship can carry out its mission, according to the GAO.

But Monday’s report, based on interviews of sailors and leaders across the fleet, reveals that basic maintenance duties and repairs are hindered not only by manning shortages, but also by inaccurate Navy guidelines and substandard training.

As of late last year, the Navy was lacking nearly 14,000 enlisted sailors to keep its aircraft carriers, surface ships and attack submarines properly manned, according to the GAO.

The watchdog also found that aircraft carriers, cruisers and amphibious assault ships did not have enough enlisted sailors assigned to them to meet requirements for safe operations as laid out by the Navy Manpower Analysis Center.

“The Navy has not provided crew levels sufficient to meet the ship maintenance workload,” one sailor told GAO investigators.

This results in a smaller crew having to do more work, compounding the stressors of ship life.

“More capable sailors that perform a lot of maintenance get burned out and tired of taking up the slack for other sailors and leave the Navy to do the same work for better pay and working conditions,” another sailor said in the report.

Exacerbating the manning shortages are sailors assigned to a specific ship who may not always be on hand for duty, due to illness or temporary assignments to another ship.

“Navy executive officers and sailors told GAO there were widespread concerns about sailor training,” the report states.

Sailors also aren’t always prepared for their jobs aboard ships, and those serving in maintenance-heavy roles “may be less experienced than other sailors on that same ship,” according to the GAO.

Training for sailor-led maintenance is also insufficient, sailors told the watchdog.

Sailors attend A school after boot camp to get initial training with instructors and computers, but some interviewed by GAO questioned how well A school prepared them for their shipboard duties.

“Specifically, sailors expressed dissatisfaction with both the quality of training — whether it prepares them to perform maintenance aboard ship — and the format in which training is delivered,” the report said.

The Navy is working to enhance sailor-led maintenance training through its Ready Relevant Learning initiative, which involves distributing videos of sailor-led maintenance to schoolhouses, according to the report.

The Navy is also aiming to share these videos with sailors via cloud based services and remote support.

Still, videos for certain maintenance specialties like electrical repair are not yet available, and some sailors noted that video training is not always reliable on the ship, given limited bandwidth.

Sailors aboard the Navy destroyer Arleigh Burke clear ice off the aft missile deck in the North Sea on March 10, 2023. (U.S. Navy)

“More (maintenance) training should be conducted before a sailor arrives at their ship and while they are transitioning between commands,” one sailor told the GAO.

The GAO offered several recommendations, including that the service improve the “quality of information on the number of ship’s crew available for duty” and guarantee that personnel numbers and skill levels for certain kinds of maintenance are tailored for specific ships and classes.

“The Navy’s guidelines for performing ship maintenance are sometimes inaccurate with respect to the time and personnel needed and are not written appropriately for sailors’ maintenance skills and supervisor’s experience levels,” the watchdog said. “Ensuring the Navy’s guidelines better reflect the actual number and skill level of maintenance personnel will enhance sailors’ ability to maintain ships.”

The Navy agreed with these recommendations, according to the watchdog.

The GAO surveyed executive officers from 232 ships in the fleet with a 91% response rate and met with more than 140 leaders and 200 sailors on 25 ships for the report, which began in January 2023 and ended earlier this month.

Go here to read the full report.



Source link

LEAVE A REPLY

Please enter your comment!
Please enter your name here

Share post:

Advertise With Us

For a sponsored / Paid / Guest Post. advertisers that target the software, games, telecom and IT industry. contact us at dagoldinfo@gmail.com

Popular

More like this
Related

Proxicast Indoor/Outdoor 2×2 MIMO Omnidirectional WiFi Antenna – Tri-Band 2.4/5.8/6 GHz – 3-5 dBi Gain – Vandal Resistant Low Profile Fixed Through-Hole Mount –...

Product Description FactoryFactory

Proxicast Tri-Band 2x2 MIMO WiFi Omni Antenna Model # ANT-131-M22

Key Features

Smaller than a can of soupSmaller than a can of soup

Through hole mountingThrough hole mounting

WaterproofWaterproof

Low Profile

Inconspicuous - 3.2 inches TallSimple Geometric ShapeOmnidirectional CoveragePaintable to Blend into Surroundings Vandal Resistant

Thick Threaded Mounting PostNot Removable from OutsideNo Exposed Coax Cabling Waterproof

Water & Dust Proof IP67 Rated When InstalledAdhesive Rubber Gasket between Antenna and Mounting Surface

For outdoor/indoor applications. Excellent for Wi-Fi hotspots, kiosks, M2M, IoT, telemetry and vehicle applications. Connect this antenna to existing Wi-Fi routers, access points or other Wi-Fi enabled devices which have 2 reverse polarity SMA external antenna connectors.

This low profile (~ 3 inches tall) fixed mount omni-directional 2x2 MIMO antenna provides 3 to 5 dBi of gain and supports the 802.11 b/g/n 2.4 GHz, 802.11 a/ac/ax 5.8 GHz and 802.11 be 6 GHz (Wi-Fi 7) frequency bands.

Permanently mounts via a 1/2 in. (13 mm) hole with locking internal nut. Resists vandalism with no exposed coax cable, high impact ABS radome shell and an extra thick threaded screw mounting post. Includes 10 ft of low-loss RG174 paired coax fed through center mounting post. Includes "L" bracket for optional wall mounting.

Ideal for use in vending machines, meter housings, equipment sheds, or other locations requiring a low-profile vandal resistant external antenna. Also suitable for vehicle mounting on buses, vans, trucks or other mobile installations. Completely waterproof (IP67) when installed with post extending into a water-tight enclosure. Not waterproof when used exclusively with wall bracket.

Integrated RPSMA male plug connectors mate with female jacks found on most Wi-Fi access points and routers.

* For optimum performance this antenna should be mounted on a flat, horizontal metal surface at least 8 inches in diameter.

Works with Any WiFi System

WiFi LogoWiFi Logo Use with Any WiFi Device that has 2 External Antennas Simple Installation Drill 1/2" Hole in Mounting Surface Feed Coax Through Hole Tighten Antenna Lock Nut Unscrew Factory Antennas from Device Screw on Proxicast Antenna Cables Tri-Band 2.4 , 5.8 & 6 GHz Support Supports all WiFi Technologies and Generations

WiFi-1 ~ 802.11aWiFi-2 ~ 802.11bWiFi-3 ~ 802.11gWiFi-4 ~ 802.11niWiFi-5 ~ 802.11acWiFi-6 ~ 802.11axWiFi-7 ~ 802.11be Universal Compatibility

Industry Standard RP-SMA ConnectorWorks with Any Brand of WiFi Access Point, Router, Booster, Repeater, Bridge, Camera, etc.Use with Mesh Wireless RadiosUse as a Bluetooth or ZigBee Antenna

Technical Specifications

Frequency Range 2.4, 5.8 & 6 GHz WiFi Frequency Bands Peak Gain 5 dBi Impedance 50 Ohm VSWR < 2:1 Polarization Vertical Connectors 2x Reverse Polarity SMA Male Plugs (RP-SMA) Coax Length 10 ft (3 m) Low-Loss RG174 Paired Coax Mounting Screw Mounted via a 1/2 in. (13 mm) Hole with Locking Internal Nut Ground Plane 8" diameter min recommended Dimensions Height 3.2 in. (82mm); Diameter 1.9 in. (48 mm) Weight 4.2 oz (119 g) Materials ABS Plastic (black) + Nickel-Plated Brass + Foam Adhesive Pad Operating Temperature -40°C to +70°C Full Specification Sheet Download PDF under the Product Guides and Documents section of this listing Support Free US-based Support Model Number ANT-131-M22

Application Examples

Vending MachinesVending Machines

Kiosks & ATMsKiosks & ATMs

Machine Control PanelsMachine Control Panels

Surveillance CameraSurveillance Camera

Vending Machines

Inventory LevelsMachine StatusAdvertising UpdatesPrice Changes Kiosks & ATMs

Bank MachinesSelf Service KiosksDigital SignageAlarm Systems Machine Control Panels

PLC'sNEMA EnclosuresWeather StationsMeters & Pump Houses Surveillance

WiFi CamerasDVRs' & NVR'sCovert InstallationsLaw Enforcement Add to Cart Add to Cart Customer Reviews 3.5 out of 5 stars 40 3.5 out of 5 stars 40 4.6 out of 5 stars 12 3.7 out of 5 stars 25 Price $27.95$27.95 $39.95$39.95 — — WiFi Bands 2.4, 5.8 & 6 GHz 2.4, 5.8 & 6 GHz 2.4, 5.8 & 6 GHz 2.4, 5.8 & 6 GHz Peak Gain 5 dBi 5 dBi 2-4 dBi 2 dBi Height 3.2 in 3.2 in 0.65 in 0.6 in Diameter 1.9 in 1.9 in 3.2 in 1.8 in Connector RP-SMA Male 2 x RP-SMA Male 2 x RP-SMA Male RP-SMA Male Coax Length 10 ft 10 ft 3 ft 6.5 ft Feature Vandal Resistant 2x2 MIMO 2x2 MIMO Small Diameter
MIMO Omni Directional Indoor / Outdoor WiFi Antenna - 3 inches Tall with 3-5 dBi Gain - Permanent Mount - Weatherproof
Works on all WiFi Networks Worldwide including 2400 MHz, 5800 MHz and 6000 MHz. Supports all WiFi Versions including WiFi-6 and WiFi-7
2 Reverse Polarity SMA Male Connectors on 10 ft Low-Loss Coax Lead - Rugged Vandal Proof Materials & Design
Compatible WiFi Outdoor Antenna for WLAN Devices such as Access Points, Hotspots and Routers from Airlink, ASUS, CalAmp, Cisco, Cradlepoint, Digi, D-Link, Linksys, MoFi, Netgear, Novatel, Pepwave, TP-Link, Sierra Wireless and many others
Ideal for industrial, commercial and IOT applications such as Retail Hot Spots, Kiosks, Vending, Point-of-Sale (POS), Machine-to-Machine (M2M), Video Surveillance (Cameras, DVRs, NVRs), NEMA Control Panels & Enclosures, Mobile & Vehicles (buses, trucks, cars, vans, motorhomes), SCADA, Telemetry, PLCs, RTUs, Digital Signage and more