Rohit Sharma Issues A Strict Ultimatum On KL Rahul After Sarfaraz’s Dominance In The First Test

Date:


Doubt over KL Rahul’s position in the Playing 11 on the return of Gill (Image: X.com)

IND vs NZ: With a dismaying performance in the first test at the Chinnaswamy, KL Rahul found himself again in a tough situation where his existence in the 11 would be under the radar.

With Sarfaraz Khan, as the replacement for Shubman Gill, India’s full-time no. 3 batter, going on to score a decisive 150-run knock at the Chinnaswamy, he seems to have made a spot for himself. At the same venue, veteran batter KL Rahul missed on scoring opportunities across both innings even at his home ground.

The Bengaluru boy’s position in the Indian team now seems more threatened with Shubman Gill’s indicative comeback ahead of the second Test. Gill, who scored a century in the last Bangladesh game, missed the first Test due to stiffness in his neck.

Even skipper Rohit Sharma addressed the situation that may arise between Rahul, Sarfaraz, and Gill in the post-match interview. Rohit Sharma clearly mentioned that every player is well aware of their position or where they stand on the side.

India lost a Test match to New Zealand at home after 36 years

New Zealand script history with an iconic win after 3 decades long (Image Credit: India Today)

Honestly, not one of the brightest days in Indian cricket history, as India has faced a severe reality check from the WTC Champions of 2021. New Zealand have always been a dominant Test side, but not in sub-continent conditions.

Even the Blackcaps faced a sheer crumble when they had to face a series sweep against the Sri Lankan nation not many weeks ago worth forgetting. The Blackcaps, under newly appointed test skipper Latham, bulged into a new dimension as they broke their decades-old record.

From bowling out the most dominant home side for a minor score of 46 to Matt Henry and Will O’Rourke sharing 15 wickets between them, New Zealand have set the tone for a win since the very first session of the rain-affected match.

New Zealand batting sensation Kane Willaimson has missed this test tour, and in turn, the two players who mark their Test debut for New Zealand on Indian soil, Devon Conway and Rachin Ravindra, played brilliantly to hand the Kiwis the early lead of 356 runs.

Following this, India looked to crawl back into the game with powerful strides forward from the Indian top-order batters Rohit, Virat, and young Sarfaraz. The only support they got was from Pant’s 99, after which it seemed another batting collapse.

The rain god didn’t favour the hosts as play resumed on Day 5, and despite early strikes from Jasprit Bumrah, New Zealand chased the timid total of 107 runs with 8 wickets to spare. Ravindra was named the Player of the Match for his contributions to the bat.

ALSO READ: IND vs NZ: Washington Sundar has been brought back to the Indian side for the second test



Source link

LEAVE A REPLY

Please enter your comment!
Please enter your name here

Share post:

Advertise With Us

For a sponsored / Paid / Guest Post. advertisers that target the software, games, telecom and IT industry. contact us at dagoldinfo@gmail.com

Popular

More like this
Related

Proxicast Indoor/Outdoor 2×2 MIMO Omnidirectional WiFi Antenna – Tri-Band 2.4/5.8/6 GHz – 3-5 dBi Gain – Vandal Resistant Low Profile Fixed Through-Hole Mount –...

Product Description FactoryFactory

Proxicast Tri-Band 2x2 MIMO WiFi Omni Antenna Model # ANT-131-M22

Key Features

Smaller than a can of soupSmaller than a can of soup

Through hole mountingThrough hole mounting

WaterproofWaterproof

Low Profile

Inconspicuous - 3.2 inches TallSimple Geometric ShapeOmnidirectional CoveragePaintable to Blend into Surroundings Vandal Resistant

Thick Threaded Mounting PostNot Removable from OutsideNo Exposed Coax Cabling Waterproof

Water & Dust Proof IP67 Rated When InstalledAdhesive Rubber Gasket between Antenna and Mounting Surface

For outdoor/indoor applications. Excellent for Wi-Fi hotspots, kiosks, M2M, IoT, telemetry and vehicle applications. Connect this antenna to existing Wi-Fi routers, access points or other Wi-Fi enabled devices which have 2 reverse polarity SMA external antenna connectors.

This low profile (~ 3 inches tall) fixed mount omni-directional 2x2 MIMO antenna provides 3 to 5 dBi of gain and supports the 802.11 b/g/n 2.4 GHz, 802.11 a/ac/ax 5.8 GHz and 802.11 be 6 GHz (Wi-Fi 7) frequency bands.

Permanently mounts via a 1/2 in. (13 mm) hole with locking internal nut. Resists vandalism with no exposed coax cable, high impact ABS radome shell and an extra thick threaded screw mounting post. Includes 10 ft of low-loss RG174 paired coax fed through center mounting post. Includes "L" bracket for optional wall mounting.

Ideal for use in vending machines, meter housings, equipment sheds, or other locations requiring a low-profile vandal resistant external antenna. Also suitable for vehicle mounting on buses, vans, trucks or other mobile installations. Completely waterproof (IP67) when installed with post extending into a water-tight enclosure. Not waterproof when used exclusively with wall bracket.

Integrated RPSMA male plug connectors mate with female jacks found on most Wi-Fi access points and routers.

* For optimum performance this antenna should be mounted on a flat, horizontal metal surface at least 8 inches in diameter.

Works with Any WiFi System

WiFi LogoWiFi Logo Use with Any WiFi Device that has 2 External Antennas Simple Installation Drill 1/2" Hole in Mounting Surface Feed Coax Through Hole Tighten Antenna Lock Nut Unscrew Factory Antennas from Device Screw on Proxicast Antenna Cables Tri-Band 2.4 , 5.8 & 6 GHz Support Supports all WiFi Technologies and Generations

WiFi-1 ~ 802.11aWiFi-2 ~ 802.11bWiFi-3 ~ 802.11gWiFi-4 ~ 802.11niWiFi-5 ~ 802.11acWiFi-6 ~ 802.11axWiFi-7 ~ 802.11be Universal Compatibility

Industry Standard RP-SMA ConnectorWorks with Any Brand of WiFi Access Point, Router, Booster, Repeater, Bridge, Camera, etc.Use with Mesh Wireless RadiosUse as a Bluetooth or ZigBee Antenna

Technical Specifications

Frequency Range 2.4, 5.8 & 6 GHz WiFi Frequency Bands Peak Gain 5 dBi Impedance 50 Ohm VSWR < 2:1 Polarization Vertical Connectors 2x Reverse Polarity SMA Male Plugs (RP-SMA) Coax Length 10 ft (3 m) Low-Loss RG174 Paired Coax Mounting Screw Mounted via a 1/2 in. (13 mm) Hole with Locking Internal Nut Ground Plane 8" diameter min recommended Dimensions Height 3.2 in. (82mm); Diameter 1.9 in. (48 mm) Weight 4.2 oz (119 g) Materials ABS Plastic (black) + Nickel-Plated Brass + Foam Adhesive Pad Operating Temperature -40°C to +70°C Full Specification Sheet Download PDF under the Product Guides and Documents section of this listing Support Free US-based Support Model Number ANT-131-M22

Application Examples

Vending MachinesVending Machines

Kiosks & ATMsKiosks & ATMs

Machine Control PanelsMachine Control Panels

Surveillance CameraSurveillance Camera

Vending Machines

Inventory LevelsMachine StatusAdvertising UpdatesPrice Changes Kiosks & ATMs

Bank MachinesSelf Service KiosksDigital SignageAlarm Systems Machine Control Panels

PLC'sNEMA EnclosuresWeather StationsMeters & Pump Houses Surveillance

WiFi CamerasDVRs' & NVR'sCovert InstallationsLaw Enforcement Add to Cart Add to Cart Customer Reviews 3.5 out of 5 stars 40 3.5 out of 5 stars 40 4.6 out of 5 stars 12 3.7 out of 5 stars 25 Price $27.95$27.95 $39.95$39.95 — — WiFi Bands 2.4, 5.8 & 6 GHz 2.4, 5.8 & 6 GHz 2.4, 5.8 & 6 GHz 2.4, 5.8 & 6 GHz Peak Gain 5 dBi 5 dBi 2-4 dBi 2 dBi Height 3.2 in 3.2 in 0.65 in 0.6 in Diameter 1.9 in 1.9 in 3.2 in 1.8 in Connector RP-SMA Male 2 x RP-SMA Male 2 x RP-SMA Male RP-SMA Male Coax Length 10 ft 10 ft 3 ft 6.5 ft Feature Vandal Resistant 2x2 MIMO 2x2 MIMO Small Diameter
MIMO Omni Directional Indoor / Outdoor WiFi Antenna - 3 inches Tall with 3-5 dBi Gain - Permanent Mount - Weatherproof
Works on all WiFi Networks Worldwide including 2400 MHz, 5800 MHz and 6000 MHz. Supports all WiFi Versions including WiFi-6 and WiFi-7
2 Reverse Polarity SMA Male Connectors on 10 ft Low-Loss Coax Lead - Rugged Vandal Proof Materials & Design
Compatible WiFi Outdoor Antenna for WLAN Devices such as Access Points, Hotspots and Routers from Airlink, ASUS, CalAmp, Cisco, Cradlepoint, Digi, D-Link, Linksys, MoFi, Netgear, Novatel, Pepwave, TP-Link, Sierra Wireless and many others
Ideal for industrial, commercial and IOT applications such as Retail Hot Spots, Kiosks, Vending, Point-of-Sale (POS), Machine-to-Machine (M2M), Video Surveillance (Cameras, DVRs, NVRs), NEMA Control Panels & Enclosures, Mobile & Vehicles (buses, trucks, cars, vans, motorhomes), SCADA, Telemetry, PLCs, RTUs, Digital Signage and more